Skyhub
UgCS SkyHub is an on-board computer for DJI drones, ideal for integrating advanced sensors and automating missions in professional surveys. Compatible with magnetometers, georadars and UgCS software, it optimizes data collection in complex operations.
2.899,00 € TAX Included
SkyHub
The SkyHub + True Terrain following solution (with Nanorarad 24ghz) is a hardware and software set designed to enhance the capabilities of standard commercial UAVs for industrial purposes and to support the integration of various sensors.
Thanks to this kit it is possible to integrate on DJI Matrice 300/350 Drones or on our X1000 Pro RTK Sensors such as:
- Georadar "GPR" (Zond and Cobra)
- Magnetometers (Sensys and Geometrics)
- Echosounder for Beatmetry (single and dual frequency)
- Methane detection sensors (Laser Falcon)
Thanks to the Terrain Following combined with the skyhub it will be possible to set up very low altitude missions and the drone will follow the terrain profile while maintaining the desired altitude from 0.5mt to 50mt and beyond. (Needed for all Geophysical applications where the sensor needs to stay as close to the ground as possible during flight
SkyHub is an on-board computer to record georeferenced data from various sensors such as GPR, altimeter, magnetometer, echo sounder or methane detector.By Default, SkyHub comes with mounts and cables for the drone DJI M300/M350 RTK or X1000 Pro RTK. Mounts and cables for other drone types are available upon request.
Applications
- Custom integration of payload with drone
- Advanced UAV flight control scenarios.
- Using drones in an adverse environment
Functions
- Fully insulated and ESD-protected exterior of interfaces
- Industrial connectors
- Selectable power output (9 V / 12 V / 15 V /18 V)
- Passing power from drone to payloads
- 3×UART / 1x RS-232 / 1x UART/RS-232 combined / 2× USB
- Ethernet / Wi-Fi / Bluetooth Interfaces
- 4 GPIO pin pairs for general purpose Input Output
- Protection against input power inversion
- Extended operating temperature range from -25°C to +50°C
Interfaces
The SkyHub 3 device provides a connection
to different payloads through different interfaces:
- 3× UART interfaces
- 1× UART/RS-232 interface
- 1× RS-232 interface
- 4 GPIO pin pairs
- Ethernet interface
- Bluetooth interface
- 2×USB 2.0
Power Outputs
SkyHub 3 eliminates the need for a separate battery or power circuit for the sensors.
Each connector with communication ports has pins with +5V and +12V that cover 99% of the power requirements for the sensors.
An additional power connector is configurable and can provide 9, 12, 15,18 V with maximum load of 5 A
Led Connections and Indicators
- 1 By default, to communicate with the altimeter (see UART/RS-232/GPIO).
- 2 By default, to communicate with the flight controller (see UART / RS-232 / GPIO).
- 3 Communicates with UART-based payloads (see UART / RS-232 / GPIO)
- 4 By default to communicate with any UART- or RS-232-based Sensors (see UART/RS-232/GPIO).
- 5 Communicates with RS-232-based payloads (see UART / RS-232 / GPIO)
- 6 Power input Power input, two ports to enable drone power passage (see Power input)
- 7 Power output Supplies the payload (see Power output).
- 8 Output power LED (red) Indicates the presence of output power
- 9 Output power selector Defines the output power for payloads (see Power selector)
- 10 Ethernet connector Communicates with Ethernet base payloads (see Ethernet)
- 11 USB ports Dual USB ports with which to communicate USB-based payloads or via USB-UART adapter (see USB ports)
- 12 Payload LED Indicates connection to payloads (incoming support)
- 13 Autopilot LED (green/red) Indicates the connection of an autopilot. Green when autopilot is working well. Red when autopilot is not connected. Transformed off when autopilot support is turned off.
- 14 Core power LED (yellow) Indicates the presence of the main power supply
Based on 0 reviews
Show only reviews in English (0)
Be the first to review “Skyhub”
Related products
- Georadar, Georadar & Magnetometer Combo, UgCS - SPH
Georadar Drone - Zond Aero 1000 NG GPR
The Zond Aero 1000 is an ultralight, single-unit ground penetrating radar (GPR) system specially designed for portable solutions. Compatible with DJI Matrice 300 and 350 drones, this georadar offers advanced performance for geophysical and archaeological survey applications.
SKU: n/a - Georadar, Georadar & Magnetometer Combo, UgCS - SPH
Georadar Drone - Zond Aero 500 NG
The Zond Aero 500 is an ultralight, single-unit ground penetrating radar (GPR) system specially designed for portable solutions. Compatible with DJI Matrice 300 and 350 drones, this georadar offers advanced performance for geophysical and archaeological survey applications.
SKU: n/a - Combo Bathymetry, Drone bathymetry, Echosounder
EchoLogger ECT D052S
The ECT D052S Echologger is a dual-frequency echosounder for hydrographic surveys and sediment analysis. Compatible with DJI drones, it measures up to 200 m accurately with 50 kHz and 200 kHz frequencies, integrating tilt and temperature sensors for reliable data.
SKU: n/a - Georadar & Magnetometer Combo, Magnetometer
Drone magnetometer - Sensys MagDrone R3
The Sensys MagDrone R3 is an ultra-portable magnetometer for drones, compatible with DJI M300 and M350 RTK. Designed for surveys over large areas, it is ideal for operations inaccessible on the ground. Equipped with built-in GPS, it supports optimal geotagging and connects to external GPS. Perfect for mining exploration, security, archaeology and underground structure surveying.
SKU: n/a
There are no reviews yet.