Drone magnetometer - Sensys MagDrone R3
The Sensys MagDrone R3 is an ultra-portable magnetometer for drones, compatible with DJI M300 and M350 RTK. Designed for surveys over large areas, it is ideal for operations inaccessible on the ground. Equipped with built-in GPS, it supports optimal geotagging and connects to external GPS. Perfect for mining exploration, security, archaeology and underground structure surveying.
From 19.520,00 € TAX Included
Drone magnetometer - Sensys MagDrone R3
The ultra-portable MagDrone R3 drone magnetometer is perfectly compatible with DJI M300 and M350 RTK drones. Designed to survey large areas, the MagDrone R3 proves indispensable when ground surveys are no longer possible for either humans or vehicles(UAVs).
Features of the MagDrone R3
The MagDrone R3, starting with model SN 200xxx, has a built-in GPS and can be connected to an external GPS for optimal data geotagging. This configuration is especially recommended when the R3 is used with the SkyHub on-board computer and an RTK-equipped drone.
For accurate results, it is critical to fly as low as possible during survey operations, especially when locating man-made objects or artifacts. The recommended altitude for activities such as searching for unexploded ordnance(UXO) is 1 meter or less above the surface. Therefore, it is essential that the drone be equipped with a terrain monitoring system, which is included in the recommended magnetometer package.
Applications of the MagDrone R3
The MagDrone R3 is versatile and can be used in a wide range of applications, including:
- General Surveys: Ideal for surveys over large areas and for creating magnetic maps of scientific interest.
- Mineral Exploration: Useful for searching for mineral deposits.
- Security and BOB: Perfect for scanning areas for bombs and ammunition, for preventive control and surveillance of sensitive areas against intruders.
- Archaeology: Supports archaeological research by locating underground metal objects.
- Searching for Metal Objects: Effective in searching for metal objects weighing a few hundred grams or more that lie underground.
- Survey of Substructures: Essential for the detection of underground structures.
Note that the general rule with the magnetometer when it is necessary to detect man-made objects or artifacts is to fly as low as possible. Recommended altitude for activities such as UXO research: 1 m above the surface or less. This means that the drone must be equipped with a terrain monitoring system (included in the recommended magnetometer package).
How it works
Operation of the MagDroneR3 is simple to use. It comes with a single button and a built-in server that can be accessed from any WIFI device, such as a smartphone, tablet, or laptop. This helps simplify setup, configuration, system control, as well as remote start/stop of recordings and data downloading.
The MagDrone data tool helps to identify flown tracks, trim, filter, and compensate raw data, generate a preview, and export to various formats to further process the recorded values, such as using MAGNETO® software, GIS tools, or Matlab with its own scripting.
MagDrone series: filters out noise
With a sampling rate of 200 Hz, the MagDrone series can easily filter out noise from network frequencies, infrastructure or UAV/drone engines. Therefore, MagDrone devices can be installed directly on the drone landing gear to enable a very compact configuration.
MagBase - Magnetometer Data
Together with the SENSYS MagBase instrument acting as a reference station, data from the drone-based magnetometer can be correlated with data from the MagBase. This will enable the cancellation of temporary noise sources such as passing vehicles or net frequencies.
Standard Magnetometer Kit:
What the Kit Includes:
1 x MagDrone R3 magnetometer with 2 triaxial fluxgate magnetic sensors, sensor bar and data logger
1 x MagDrone Data Tool software
1 x MagDrone R3 power cable (XT30 plug for SkyHub )
1 x USB cable to connect MagDrone R3 to Windows computer
1 x Cable to connect MagDrone R3 to SkyHub GPS output interface
1 x DJI M300/350 RTK drone mounts
1 x Manual
1 x Hard carrying case
Drone combo kit:
What the kit includes:
1 x MagDrone R3 magnetometer with 2 triaxial fluxgate magnetic sensors, sensor bar and data logger
1 x MagDrone Data Tool software
1 x MagDrone R3 power cable (XT30 plug for SkyHub )
1 x USB cable to connect MagDrone R3 to Windows computer
1 x Cable to connect MagDrone R3 to SkyHub's GPS output interface
1 x DJI M300/350 RTK Drone Mounts
1 x Drone Matrice 350 RTK
4 x Batteries TB 65
1 x BS65 Charging Station for Drone Batteries
1 x SkyHub Kit with Terrain Following Nanoradar
1 x UGCS Pro mission planning software
1 x Setup and installation of the Drone + GPR system
1 x 4-hour preparatory course
Technical Data MagDrone R3
General Technical Data | |
Power Supply | 11.1 V; 1,950 mAh Li-Ion re-chargeable battery |
Operating Temperature | -20°C to +50°C |
Weight / with Li-Ion battery | 750 g / 884 g |
Overall power consumption | 500 mA |
Sensor tube dimensions (W x D x H) | 1,070 x 22 mm |
FGM3D/75 Fluxgate | |
Number and orientation of sensors | 2 pieces, laid horizontal, parallel |
Specified measurement range | ±75,000 nT (higher ranges available on request) |
Number of sensor axis | 3 |
Distance between sensor centre points | 1,000 mm |
Datalogger | |
Power | 50 mA |
Sensor input | Internal wired |
User Interface | On/Off + Start/Stop button; status LED |
Survey mode | Recording when start/stop pressed |
Sampling rate | 200 Hz (higher rates available on request) |
Internal memory | 2 GB |
Datalogger dimensions (W x D x H) | 230 x 128 x 43/73 mm |
Standard package | |
MagDrone R3 | Sensor tube, 2 pcs. built-in FGM3D/75 sensors, data logger (fixed to tube), 2 pcs. rechargeable batteries |
Rugged case (W x D x H) | 1120 x 290 x 110 mm |
Internal GPS | U Blox PAM-7Q |
Peripherals | Data transfer cables (USB), set of internat. power plugs, wall charger, accessory bags, USB memory stick with software |
Documentation | Certificate, manual, quick guide |
PC software | MagDrone DataTool |
Optional accessories | |
Data processing | MAGNETO® Software |
Based on 0 reviews
Show only reviews in English (0)
Be the first to review “Drone magnetometer - Sensys MagDrone R3”
Related products
- Georadar, Georadar & Magnetometer Combo, UgCS - SPH
Georadar Drone - Zond Aero 500 NG
The Zond Aero 500 is an ultralight, single-unit ground penetrating radar (GPR) system specially designed for portable solutions. Compatible with DJI Matrice 300 and 350 drones, this georadar offers advanced performance for geophysical and archaeological survey applications.
SKU: n/a - Echosounder, Georadar, Magnetometer, Onboard Computer
Skyhub
UgCS SkyHub is an on-board computer for DJI drones, ideal for integrating advanced sensors and automating missions in professional surveys. Compatible with magnetometers, georadars and UgCS software, it optimizes data collection in complex operations.
SKU: SKYHUB3 - Georadar & Magnetometer Combo, Magnetometer
Drone magnetometer - Sensys MagDrone R4
The Sensys MagDrone R4 is an ultra-portable magnetometer for drones, compatible with DJI M300 and M350 RTK. Designed for surveys over large areas, it is ideal for operations inaccessible on the ground. Equipped with built-in GPS, it supports optimal geotagging and connects to external GPS. Perfect for mining exploration, security, archaeology and underground structure surveying.
SKU: n/a - Georadar, Georadar & Magnetometer Combo, UgCS - SPH
Georadar Drone - Zond Aero 1000 NG GPR
The Zond Aero 1000 is an ultralight, single-unit ground penetrating radar (GPR) system specially designed for portable solutions. Compatible with DJI Matrice 300 and 350 drones, this georadar offers advanced performance for geophysical and archaeological survey applications.
SKU: n/a
There are no reviews yet.